Netgear DG834GSP User Manual download pdf (Page 12)

Reference Manual for the ADSL Modem Wireless Router DG834GSP

B-12 NETGEAR VPN Configuration

v1.0, June 2007

5. Configure the DG834GSP as in the Gateway-to-Gateway procedures using the VPN Wizard

(see “How to Set Up a Gateway-to-Gateway VPN Configuration” on page 8-21), being certain

to use appropriate network addresses for the environment.

The LAN Addresses used in this example are as follows:

a. In Step 1, enter toFVL328 for the Connection Name.

b. In Step 2, enter fvl328.dyndns.org for the remote WAN's IP address.

c. In Step 3, enter the following:

• IP Address = 172.23.9.1

• Subnet Mask = 255.255.255.0

6. Configure the FVL328 as in the Gateway-to-Gateway procedures for the VPN Wizard (see

“How to Set Up a Gateway-to-Gateway VPN Configuration” on page 8-21), being certain to

use appropriate network addresses for the environment.

a. In Step 1, enter toDG834 for the Connection Name.

b. In Step 2, enter dg834g.dyndns.org for the remote WAN's IP address.

c. In Step 3, enter the following:

• IP Address = 10.5.6.1

• Subnet Mask = 255.255.255.0

7. Test the VPN tunnel by pinging the remote network from a PC attached to the DG834GSP.

a. Open the command prompt (Start -> Run -> cmd)

b. ping 172.23.9.1

Device LAN IP Address LAN Subnet Mask

DG834GSP 10.5.6.1 255.255.255.0

FVL328 172.23.6.1 255.255.255.0

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

No comments

Netgear DG834GSP User Manual Page 12