Netgear GSM7324 User Manual download pdf (Page 11)

Page 10 of 24

• After ascertaining this information, the switch automatically configures the RJ-45 port to enable

communications with the attached device, without requiring user intervention. In this way, the

Auto Uplink technology eliminates the need for setting uplink connections or being concerned

about whether to use crossover or straight-through cables when attaching devices.

Figure 2-3. Warning! Creating Redundant Paths between Network Devices

SFP module bay

The last four ports (21,22,23,24) on GSM7324 can be used for either STP (RJ45) or SFP (fiber) type cable.

However, both port types can not be used at the same time. The switch will detect the port in use

automatically simply by the first connected interface. If both connectors are plugged in at the same, the

result is undetermined.

The SFP bay accommodates a standard SFP module which has an SC connector that is compatible with

the IEEE 802.3z 1000BASE-SX standard.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 25 26

No comments

Netgear GSM7324 User Manual Page 11