Netgear GSM7226LP-100NES Datasheet download pdf (Page 7)

ProSAFE® Intelligent Edge Managed Switches Data Sheet

M4100 series

Page7of36

Select desktop versions also come with a set of

strong magnets for mounting on any metal surface

• M4100-D10-POE (FSM5210P)

• M4100-D12G (GSM5212)

AutomaticcongurationwithDHCPandBootPAutoInstalleaseslargedeploymentswithascalablecongurationlesmanagementcapability,mappingIPaddresses

and host names and providing individual conﬁguration ﬁles to multiple switches as soon as they are initialized on the network

Both the Switch Serial Number and Switch primary MAC address are reported by a simple "show" command in the CLI - facilitating discovery and remote

conﬁguration operations

AutomaticVoiceoverIPprioritizationwithAuto-VoIPsimpliesmostcomplexmulti-vendorIPtelephonesdeploymentseitherbasedonprotocols(SIP,H323and

SCCP) or on OUI bytes (default database and user-based OUIs) in the phone source MAC address; providing the best class of service to VoIP streams (both data and

signaling)overotherordinarytracbyclassifyingtrac,andenablingcorrectegressqueueconguration

AnassociatedVoiceVLANcanbeeasilyconguredwithAuto-VoIPforfurthertracisolation

When deployed IP phones are LLDP-MED compliant, the Voice VLAN will use LLDP-MED to pass on the VLAN ID, 802.1P priority and DSCP values to the IP phones,

accelerating convergent deployments

Versatile connectivity including “PoE Passthrough”

IEEE 802.3af Power over Ethernet (PoE) provides up to 15.4W per port (M4100-D10-POE; M4100-26-POE; M4100-50-POE; M4100-26G-POE)

IEEE 802.3at Power over Ethernet Plus (PoE+) provides up to 30W per port (M4100-D12G-POE+; M4100-12G-POE+; M4100-24G-POE+;

M4100-50G-POE+)

Desktop versions can be powered by upstream PoE+ switch using their Port-1 (PD, PoE+ 30W): M4100-D12G and M4100-D12G-POE+

M4100-D12G-POE+canevenredistributePoEpowerfromtheupstreamPoE+switchtoVoIPphonesorotherdevicesinmeetingrooms,retailsalesoorsorother

challenging environments without outlet

Both IEEE 802.3at Layer 2 LLDP method and 802.3at 2-event classiﬁcation methods are supported for compatibility with all PoE+ PD devices

Automatic MDIX and Auto-negotiation on all ports select the right transmission modes (half or full duplex) as well as data transmission for crossover or straight-

through cables dynamically for the admin

100Mbps backward compatiblity on all SFP ports

IPv6supportwithmulticasting(MLDforIPv6ltering),ACLsandQoS

Tier 1 availability

Rapid Spanning Tree (RSTP) and Multiple Spanning Tree (MSTP) allow for rapid transitionning of the ports to the Forwarding state and the suppression of Topology

Change Notiﬁcation

IPaddressconictdetectionperformedbytheembeddedDHCPserverpreventsaccidentalIPaddressduplicatesfromperturbingtheoverallnetworkstability

Power redundancy for higher availability when mission critical, including hot-swap PSUs and Fans

Ease of management and control

Dual ﬁrmware image and dual conﬁguration ﬁle for transparent ﬁrmware updates/conﬁguration changes with minimum service interruption

Flexible Port-Channel /LAG (802.3ad) implementation for maximum compatibility, fault tolerance and load sharing with any type of Ethernet channeling from other

vendors switch, server or storage devices conforming to IEEE 802.3ad - including static (selectable hashing algorithms) or dynamic LAGs (highly tunable LACP Link

Aggregation Control Protocol )

Modern access layer features highlights

Installing M4100 desktop series using Magnets

1 2 3 4 5 6 7 8 9 10 11 12 ... 35 36

Comments to this Manuals

No comments

Netgear GSM7226LP-100NES Datasheet Page 7

Comments to this Manuals

Related products and manuals for Network switches Netgear GSM7226LP-100NES