Netgear FSM7226RS-100EUS Datasheet download pdf (Page 2)

ProSafe

®

24- and 48-port 10/100 L2+ Managed Stackable Switch with 2 Gigabit Ports FSM7226RS, FSM7250RS

Technical Speciﬁcations

Network Protocol and Standards •

Compatibility

IEEE 802.3 10BASE-T –

IEEE 802.3u 100BASE-TX –

IEEE 802.3z 1000BASE-X –

IEEE 802.3ab 1000BASE-T –

IEEE 802.3x ﬂow control –

Layer 2 Services•

IEEE 802.1Q static VLAN (up to 512) –

IEEE 802.1p Class of Service (CoS) –

IEEE 802.1D Spanning Tree Protocol –

IEEE 802.1v protocol VLAN & port VLAN –

IEEE 802.1w Rapid Spanning Tree Protocol –

IEEE 802.1s Multiple Spanning Tree Protocol –

IEEE 802.3ad link aggregation –

(Static, LACP)

IEEE 802.1x port access authentication –

Mac-based VLAN –

IGMP v1, v2, v3 snooping support –

IGMP querier –

Network storm protection, including –

broadcast, multicast and unicast trafﬁc

Static multicast ﬁltering –

Ingress rate limit in 1Kbps increments –

Protected port –

Private group VLAN –

Double VLAN –

MAC ﬁlter –

Port security –

Layer 3 Services•

VLAN routing –

Static routing –

Port-based routing –

Access Control Lists - MAC, IP, TCP –

ACLs - 224 global rules –

DiffServ QoS (RFC 2998) –

DNS caching –

DHCP/BOOTP relay - primary and –

backup (RFC3046, option 82)

UDP relay –

Switch Management Speciﬁcations•

SNMP v1, v2c, v3 with multiple –

IP addresses

RFC 1157, 1901-1910, 2574, 2575 –

RFC 768 UDP –

UDP relay –

RFC 854-859 telnet –

RFC 951 BOOTP –

RFC 1027 Proxy ARP –

RFC 1213 MIB II –

RFC 1757 RMON groups 1,2,3, and 9 –

RFC 1215 SNMP traps –

RFC 1493 bridge MIB –

RFC 1643 Ethernet interface MIB –

RFC 1534 DHCP and BOOTP –

interoperation

RFC 2030 Simple Network Time –

Protocol (SNTP)

RFC 2131, 2132 DHCP and BOOTP –

RFC 2865 RADIUS (both switch and –

management access)

RFC 2866 RADIUS accounting –

Private enterprise MIB –

CPU trafﬁc monitor –

Port mirroring support (many-to-one) –

SYSLOG –

Firmware upgrade via TFTP or HTTP –

Port description –

TACACS+ –

LLDP/LLDP-MED –

DHCP server –

DHCP option 81 –

Single IP Address Management •

(ﬁrmware version 7.3 or higher)

Manage up to 48 fully –

managed switches

Feature can be used with the –

following models:

- FSM726E, FSM7226RS, FSM7250RS

- FSM7328S, FSM7352S, FSM7328PS,

FSM7352PS

- GSM7224R, GSM7248R

- GSM7328S, GSM7328FS, GSM7352S

User Interfaces•

Command-line interface (CLI) –

via console port

Prosafe Control Center Web-based –

management via embedded HTTP

server protected with Secured

Sockets Layer (HTTPS)

(SSLv3) or Transport Layer Security (TLS v1) –

Telnet remote login (5 sessions) securable –

with Secure Shell (SSH v1.5, v2)

LEDs•

Per port: Speed, link, activity –

Per device: Power, fan status, stack –

ID, master, RPS

Physical Interfaces•

24 (FSM7226RS) or 48 (FSM7250RS) –

RJ-45 connectors for 10BASE-T,

100BASE-X (Auto Uplink and auto

negotiate on all ports)

2 1000Base-X with optional SFP –

connectors for ﬁber connection

2 stacking ports at 2.5 Gbps each –

RS-232 console port –

Internet

Broadband

modem

Desktop PC with

FA311

Desktop PC with

NMS100 Software

Notebook PC with

FA511

Servers with

GA311

Managed Stackable Switches

FSM7226RS and FSM7250RS

Desktop PC with

GA311

ProSafe SSL312

Concentrator 25

WG302 ProSafe 802.11g

Wireless Access Point

GS108 ProSafe

8-port Gigabit

Switch

Servers with

GA311

FVS338 ProSafe

VPN Firewall

1 2 3

Comments to this Manuals

No comments