Netgear EX6150-100PES User Manual download pdf (Page 47)

FAQs and Troubleshooting

AC1200 WiF Range Extender

• It is possible that you typed the network name, passphrase, or key incorrectly. Use Smart

Setup (see

Run Smart Setup Installation on page 17) to select a WiFi network and retype

the passphrase or key. The passphrase or key is case-sensitive. For example,

PASSWORD25 is not the same as Password25 or password25.

• If the extender cannot detect your WiFi network, check to see if your WiFi network is still

working. Make sure that the WiFi router is turned on. If possible, move the extender

closer to the WiFi router.

• If the extender Client Link LED is red, the WiFi connection between the WiFi router and

the extender is poor. You can establish the best connection with a clear line of sight

between the extender and the WiFi router. Make sure that no physical obstacles exist

between the extender and the WiFi router, and try to move the extender closer to the WiFi

router.

If you use Smart Setup, and the extender does not connect to the WiFi router, does not

connect to the Internet, or cannot get an IP address from the WiFi router, Smart Setup

displays a message to notify you that the extender is not configured.

To run Smart Setup again, click the YES button. To manually configure the extender, click the

NO, CONFIGURE MANUALLY button.

1 2 ... 42 43 44 45 46 47 48 49 50

No comments

Netgear EX6150-100PES User Manual Page 47