Netgear ME103 User Manual download pdf (Page 42)

Reference Manual for the ME103 802.11b ProSafe Wireless Access Point

4-2 Maintenance

August 2003

Table 4-1. General Information Fields

Field Description

Access Point Information

Access Point Name The default name may be changed if desired.

Note: In 802.1x mode, this name is used as the client Login name for the

RADIUS server.

MAC Address Displays the Media Access Control address (MAC address) of the wireless

access point’s Ethernet port.

Country Domain

Displays the domain or region for which the wireless access point is

licensed for use. It may not be legal to operate this wireless access point in

a region other than one of those identified in this field.

Firmware Version The version of the firmware currently installed.

Current IP Settings

These parameters apply to the Local ME103 firewall.

IP Address The IP address of the wireless access point.

Subnet Mask

The subnet mask for the wireless access point.

Gateway

The default gateway for the wireless access point communication.

IP Address Source Automatic (DHCP client) indicates that the current IP address was

obtained from a DHCP server on your network.

Wireless Settings

These parameters apply to the target remote ME103 firewall, VPN

gateway, or VPN client.

Wireless Network Name

(SSID)

Displays the wireless network name (SSID) being used by the wireless port

of the wireless access point. The default is NETGEAR.

Channel Identifies the channel the wireless port is using. 11 is the default channel

setting. See “Wireless Channels” on page B-7 for the frequencies used on

each channel.

Operating Mode

Identifies the operating mode of the ME103.

Security Settings

Authentication WEP or 802.1x authentication setting.

Encryption

The current WEP or 802.1x encryption setting.

802.1x

The current 802.1x setting.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 117 118

No comments

Netgear ME103 User Manual Page 42