Netgear ME103 User Manual Page 38

  • Download
  • Add to my manuals
  • Print
  • Page
    / 118
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 37
Reference Manual for the ME103 802.11b ProSafe Wireless Access Point
3-17 Basic Installation and Configuration
August 2003
4.
Select the Turn Access Control On check box.
5. Then, either select from the list of available wireless cards the ME103 has found in your area,
or enter the MAC address and device name for a device you plan to use. You can usually find
the MAC address printed on the wireless adapter.
Tip: You can copy and paste the MAC addresses from the ME103’s Station List menu into the
MAC Address box. To do this, configure each wireless PC to obtain a wireless link to the
ME103. The PC should then appear in the Station List menu.
Tip: You can import a list of MAC addresses from saved a NETGEAR ME102 access point
access control list. Alternatively, you can produce a list in a text file where each line is a single
MAC address. For example, the MAC address is 00 12 34 aa bb cc can be typed in the
following formats:
001234aabbcc
00 12 34 aa bb cc
00-12-34-aa-bb-cc
00:12:34:aa:bb:cc
Only one MAC address per line is allowed. The valid characters are 0 to 9 and a, b, c, d, e, and
f. The valid separators are those shown above. An invalid character will cause the line to be
ignored.
6. Click Add to add the wireless device to the access list. Repeat these steps for each additional
device you want to add to the list.
7. Be sure to click Apply to save your wireless access control list settings.
Now, only devices on this list will be allowed to wirelessly connect to the ME103.
How to Configure WEP
To configure WEP data encryption, follow these steps:
1. Log in to the ME103 using the NetBIOS name printed on the bottom of the unit or at its
default address of http://192.168.0.224 or at whatever IP address the unit is currently
configured Use the default user name of admin and default password of password, or
whatever LAN address and password you have set up.
2. Click the Wireless Settings link in the Basic section of the main menu of the ME103.
3. From the Wireless Settings menu drop-down list, select 64- or 128-bit encryption.
4. You can manually or automatically program the four data encryption keys. These values must
be identical on all PCs and Access Points in your network.
Page view 37
1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 117 118

Comments to this Manuals

No comments