Netgear EVA9150 User's Guide Page 18

  • Download
  • Add to my manuals
  • Print
  • Page
    / 104
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 17
Digital Entertainer Elite EVA9000/9150 User Manual
2-2 Basic Setup
v1.0, March 2009
If you use a digital audio/visual (A/V) receiver, NETGEAR recommends that you use an
S/PDIF coaxial or an optical cable to connect it.
The quality of the picture display is related to the video format you use. If your television
supports multiple formats, choose the format that provides the best picture quality. HDMI
offers the best picture quality video. Component video provides the next best quality, followed
by SCART, S-Video, and composite video.
2. Connect the Digital Entertainer Elite to your network.
If you are connecting to an Ethernet LAN, connect the Digital Entertainer Elite to the
LAN with an Ethernet cable.
If you are connecting to your wireless network, configure the wireless settings of the
Digital Entertainer Elite using the Basic Setup steps described in the following section. Be
prepared to provide the wireless network name (also called SSID) and the wireless
security settings for your network.
3. Turn on the television.
4. Set the video source selector on your television to match the connection from your Digital
Entertainer Elite. For example, if you used an HDMI connector, set the television to use
Digital HD or HDMI input.
5. Connect the power cord to your Digital Entertainer Elite, and plug it into an outlet.
The LED on the front of the Digital Entertainer Elite lights up to show that it is powered on.
6. Install the two AA batteries into the remote control that came with the product.
7. Optimize the television display as necessary.
If the display is not sharp, or you do not see a picture, aim the NETGEAR remote control
at the Digital Entertainer Elite, and press the TV Mode button.
You can cycle through the TV modes to get the best display.
Note: Turn on the television before you turn on the Digital Entertainer Elite.
Note: It can take 5 to 10 seconds for each TV mode change. In some modes you
might not see a picture on the TV. If you do not see a picture after four mode
changes, check the cable connections, and verify that the TV is on and set to
the correct input.
Page view 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 103 104

Comments to this Manuals

No comments