Netgear WNDAP330 Owner's Manual download pdf (Page 10)

Access Point 1

• Enter the MAC Adress of Access

Point 2 ( ) in the Remote MAC

Address field.

• Enter your Network Authentication

details. Make sure the settings you

use here are set identically in both

Access Points.

Repeat this procedure in each of the other profiles, assigning the MAC Addresses of Access

Point 3, 4 and 5 respectively to each of the profiles. Note that the Network Authentication should

be configured identically in each and all of the Access Points.

On Access Point 2, select the profile you enabled and click on the Edit button at the bottom of the

screen to change the details of the profile:

Access Point 2, 3, 4 and 5

•

Enter the MAC Adress of Access Point 1

( ) in the Remote MAC Address field.

• Enter your Network Authentication

details. Make sure the settings you use

here are set identically in both Access

Points.

Repeat this same step in each of the other Access Points. They will all be configured in the exact

same way: Same Network Authentication settings and the MAC address of Access Point 1 in the

Remote MAC Address field.

1 2 ... 5 6 7 8 9 10 11

No comments

Netgear WNDAP330 Owner's Manual Page 10