Netgear WN804 User's Guide download pdf (Page 42)

Supplemental Information

WN804 Access Point

Factory Default Settings

You can return the access point to its factory settings. Use the end of a paper clip or a similar

object to press and hold the Reset button on the back of the access point for at least 7

seconds. The access point resets and returns to the factory configuration settings shown in

the following table.

Feature Default behavior

Access point

User login URL http://192.168.0.233

User name (case-sensitive) admin

Ethernet

connection

Ethernet MAC address See the product label.

Access point mode On

Port speed 10/100 Mpbs

Local network

(LAN)

LAN IP 192.168.0.233

Subnet mask 255.255.255.0

Gateway address 192.168.0.1

DHCP client Disabled

Time zone Pacific time

Time zone automatically adjusts

for daylight savings time

Disabled

Wireless Wireless communication Enabled

SSID name See the product label.

Security WPA2-PSK (AES)

Broadcast SSID Enabled

Transmission speed Auto

1. Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary.

Network conditions and environmental factors, including volume of network traffic, building materials and

construction, and network overhead, lower actual data throughput rate.

Country/region Asia

RF channel Auto

Operating mode Up to 270 Mbps at 2.4GHz

1 2 ... 37 38 39 40 41 42 43 44 45 46

No comments

Netgear WN804 User's Guide Page 42