Netgear CVG824G User Manual Page 27

  • Download
  • Add to my manuals
  • Print
  • Page
    / 80
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 26
Wireless Cable Voice Gateway Model CVG824G Reference Manual
Wireless Configuration 2-5
v1.0, November 2006
3. Under Setup on the main menu, select Wireless Settings.
4. Configure or confirm the Wireless Settings page options described below:
Wireless Network Name (SSID): Enter an SSID up to 32 characters. The characters are
case-sensitive. The default is NETGEAR.
Channel: Select the channel for your wireless LAN. The default is channel 6. Only
change the channel if there is interference (shown by lost connections and/or slow data
transfers).
Enable Wireless Access Point: Normally the Wireless Access Point is enabled so that
computers on the network can access the Internet. The default is enabled.
Allow Broadcast of Name (SSID): If enabled, the gateway broadcasts the SSID to all
wireless stations. Stations with no SSID (or a “null” value) can use the SSID to connect to
this access point. The default is enabled.
Wireless Card Access List: You can use an Access List to increase security for the
wireless network. The Access List includes the MAC addresses of PCs that are allowed to
connect. The default is disabled. If you enable this feature, see “Configuring Your
Wireless Card Access List” on page 2-11.
Figure 2-1
Page view 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 79 80

Comments to this Manuals

No comments