Netgear 802.11b User Manual Page 28

  • Download
  • Add to my manuals
  • Print
  • Page
    / 118
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 27
Reference Manual for the ME103 802.11b ProSafe Wireless Access Point
3-7 Basic Installation and Configuration
August 2003
Figure 3-3: Connecting the Ethernet cable to a router, hub, or switch
c.
Connect an Ethernet cable from your ME103 Access Point to a LAN port (B) on your
router, switch, or hub.
Note: By default, ME103 is set to be a DHCP client. If your network uses static IP
addresses, you will need to change this setting.
d. Connect the power adapter to the wireless access point and plug the power adapter in to a
power outlet. The PWR, LAN, and Wireless LAN lights and should light up.
e. Connect the power adapter to the wireless access point and plug the power adapter in to a
power outlet. The PWR, LAN, and Wireless LAN lights and should light up.
4VERIFY WIRELESS CONNECTIVITY
Using a computer with an 802.11b or 802.11g wireless adapter with the correct wireless
settings needed to connect to the ME103 (SSID, WEP, MAC ACL, 802.1x, etc.), verify
connectivity by using a browser such as Netscape or Internet Explorer to browse the Internet,
or check for file and printer access on your network.
Note: If you are unable to connect, see Chapter 6, “Troubleshooting.”
LOC A L
10/100M
876543221INTERN ET
12VDCO.5A
Router, Switch, or Hub
Broadband modem
ME103 802.11b
ProSafe Wir eless
Access Point
ETHERNET
RESET
5-12V DC
B
Page view 27
1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 117 118

Comments to this Manuals

No comments