Netgear PTVU1000 User's Guide download pdf (Page 31)

Push2TV HD Adapter

Supported Resolutions

Problem/Question:

I have a full HD TV, but I cannot set the screen resolution on it to 1920 x 1080, which is the

native resolution of this TV.

Answer:

The maximum screen resolution supported by the product is 1080p (1920 x 1080). However,

in Mirror mode you are limited by the maximum resolution of your PC. Therefore, you need to

change the mode to Extend mode, as described in

Configuring the Display on page 22.

The Universal Push2TV HD TV Adapter Does Not Turn On

Problem/Question:

The Universal Push2TV HD TV Adapter does not turn on.

Symptom:

No picture is displayed on the wirelessly connected screen/TV.

Solution:

Make sure the power cord is correctly connected to the base. Verify that the TV is set to the

correct input (for example, HDMI1). This is done using the remote control of the TV.

Additionally, follow the steps in the Installation Guide for hardware and software installation,

and see

Configuring the Display on page 22.

The Universal Push2TV HD TV Adapter Shows a “Ready to

Connect” Message

Problem/Question:

The Wireless Laptop to Home Cinema shows a “Ready to Connect” message.

Symptom:

A standard message is displayed on the wirelessly connected screen or TV.

Solution:

See Configuring the Display on page 22. Additionally, follow the steps in the Installation

Guide for hardware and software installation.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 79 80

No comments

Netgear PTVU1000 User's Guide Page 31