Netgear 778S Quick Start Guide download pdf (Page 4)

Install the Battery

1. Insert your ﬁngernail under the battery cover

and lift the cover up gently.

2. Insert the battery into the battery compartment,

making sure the connectors align.

3. Replace the battery cover, pressing down

gently until the cover clicks into place.

Charge the Battery

1. Plug the micro-USB cable into the device.

2. Plug the other end of the cable into the

AC adapter and plug the adapter into an

electrical outlet.

3. Charge until the battery charge indicator

shows the battery is fully charged ( ).

Get Ready

1. Make sure you are in an area covered by

the Sprint 3G or 4G LTE network.

2. If you have a physical or wireless network

connection, disconnect it.

3. Make sure your computer’s Wi-Fi (wireless

network connection) mode is turned on.

BEFORE YOU START

1 2 3 4 5 6 7 8 9 ... 13 14

No comments

Netgear 778S Quick Start Guide Page 4