Netgear 762S Quick Start Guide download pdf (Page 5)

1. Press and hold the Power key for a

few seconds. Once powered up, the 4G

mobile hotspot automatically connects

to the mobile broadband network.

The ﬁrst time you turn on the 4G mobile

hotspot, you may be asked to select a language on the LCD:

a. Press the Navigation key to cycle through the available

languages until you see the one you want to use.

b. Press the Power key to select the displayed language.

(You can change the language again later from the

homepage.)

2. The LCD screen displays the message “Connect your computer

to Wi-Fi network” and shows you the Wi-Fi SSID (Network

name) and Wi-Fi Passphrase.

3. On your computer or mobile device, open your Wi-Fi/network

connection manager.

4. Select the Wi-Fi SSID displayed on the LCD screen.

5. When prompted, enter your Wi-Fi Passphrase, as it appears on

the LCD screen.

When the computer or mobile device connects to the 4G

mobile hotspot, a ‘1’ appears beside the Wi-Fi icon on the LCD

screen.

Note: The LCD screen goes into sleep mode to save power. To

wake up the LCD screen, press and release the Power key.

Step 2: Connect to the

Internet

Network

SSID: AirCard-xxxx

go to hp://aircard.hotspot

To conﬁgure your hotspot

Wi-Fi Passphrase: 12345678

Note: To connect to the mobile broadband network, your SIM

account must be active. If you use a pre-paid or pay-as-

you-go SIM, the account must have a positive balance.

1 2 3 4 5 6 7 8 9 10 ... 15 16

No comments

Netgear 762S Quick Start Guide Page 5