Netgear WPN824 User Manual download pdf (Page 34)

Reference Manual for the RangeMax Wireless Router WPN824

3-10 Connecting the Router to the Internet

202-10072-01, March 2005

For security reasons, the wireless router has its own user name and password. When prompted,

enter

admin for the router user name and password for the router password, both in lower

case letters.

3. Click Basic Settings on the Setup menu.

4. If your Internet connection does not require a login, click No at the top of the Basic Settings

menu and fill in the settings according to the instructions below. If your Internet connection

does require a login, click Yes, and skip to step 5.

a. Enter your Account Name (may also be called Host Name) and Domain Name.

These parameters may be necessary to access your ISP’s services such as mail or news

servers.

b. Internet IP Address:

If your ISP has assigned you a permanent, fixed (static) IP address for your computer,

select “Use static IP address”. Enter the IP address that your ISP assigned. Also enter the

netmask and the Gateway IP address. The Gateway is the ISP’s router to which your router

will connect.

c. Domain Name Server (DNS) Address:

If you know that your ISP does not automatically transmit DNS addresses to the router

during login, select “Use these DNS servers” and enter the IP address of your ISP’s

Primary DNS Server. If a Secondary DNS Server address is available, enter it also.

Note: If you enter an address here, restart the computers on your network so that these

settings take effect.

d. Router’s MAC Address:

This section determines the Ethernet MAC address that will be used by the router on the

Internet port. Some ISPs will register the Ethernet MAC address of the network interface

card in your computer when your account is first opened. They will then only accept

traffic from the MAC address of that computer. This feature allows your router to

masquerade as that computer by “cloning” its MAC address.

To change the MAC address, select “Use this Computer’s MAC address.” The router

will then capture and use the MAC address of the computer that you are now using. You

must be using the one computer that is allowed by the ISP. Or, select “Use this MAC

address” and type it in here.

e. Click Apply to save your settings.

5. If your Internet connection does require a login, fill in the settings according to the instructions

below. Select Yes if you normally must launch a login program such as Enternet or WinPOET

in order to access the Internet.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 173 174

No comments

Netgear WPN824 User Manual Page 34