Netgear WGR614v9 User Manual download pdf (Page 13)

Router Setup Manual

Getting to Know Your Wireless Router 9

v1.0, July 2008

Start your network in the correct sequence.

a. First, plug in and turn on the cable or DSL modem. Wait 2 minutes.

b. Now, plug the power adapter into your router and into a power outlet. Wait 1 minute.

c. Last, turn on your computer.

d. Check the router status lights to verify the following:

• Power. The power light (1) should turn solid green.

• Test. The test light (2) should turn solid amber when the router is first turned on, then

go off after 2 minutes.

• Wireless. The Wireless light (3) should be on.

• Internet. The Internet port light (4) should be lit. If not, make sure the Ethernet cable

is securely attached to the router Internet port, and the modem is powered on.

Failure to start or restart your network in the correct sequence could prevent you

from accessing the Internet.

For DSL customers, if software logs you in to the Internet, do not run that

software. You might need to go to the Internet Explorer Tools menu, select

Internet Options, and then click the Connections tab, where you can select

Never dial a connection.

Figure 8

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 35 36

No comments

Netgear WGR614v9 User Manual Page 13