Netgear RP114 User Manual download pdf (Page 30)

Reference Guide for the Model RP114 Web Safe Router

2-6 Setting Up the Hardware

Verifying Power

After connecting the power adapter to the router and a power source, the router powers on

automatically. Complete the following steps to verify that power is correctly applied to the router:

When power is first applied, verify that the PWR LED is on.

Verify that the TEST LED begins to blink within a few seconds.

After approximately 30 seconds, verify that:

The TEST LED is not lit.

The LAN LNK/ACT LEDs are lit for any local ports that are connected.

The WAN LNK LED is lit.

If a LNK or LNK/ACT LED is lit, a link has been established to the connected device.

If a LOCAL port is connected to a 100 Mbps device, verify that the 100 LED is lit.

You are now ready to begin configuration of your network, as described in the following chapter.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 154 155

No comments

Netgear RP114 User Manual Page 30