Netgear N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual Page 16
- Page / 104
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
16 | Chapter 2. Set Up Your Internet Connection
N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual
Wireless Router Setup Preparation
You can set up your wireless router with the Setup Wizard as described in Setup Wizard on
page 19, or manually as described in Manual Setup (Basic Settings) on page 20. However,
before you start the setup process, you need to have your ISP information and to make sure
the laptops, PCs, and other devices in the network have the settings described here.
Note: For a Macintosh or Linux system, you have to use manual setup.
Use Standard TCP/IP Properties for DHCP
If you set up your computer to use a static IP address, you have to change the settings back
so that it uses Dynamic Host Configuration Protocol (DHCP).
Replace an Existing Router
To replace an existing router, disconnect it and set it aside before starting the wireless router
setup.
Gather ISP Information
You need the following information to set up your wireless router and to check that your
Internet configuration is correct. Your Internet service provider (ISP) should have provided
you with all the information needed to connect to the Internet. If you cannot locate this
information, ask your ISP to provide it. When your wireless router Internet connection is set
up, you no longer need to launch the ISP’s login program on your computer to access the
Internet. When you start an Internet application, your wireless router automatically logs you
in.
• Active Internet service provided by a DSL account
• The ISP configuration information for your DSL account
- ISP login name and password
- ISP Domain Name Server (DNS) addresses
- Fixed or static IP address
- Host and domain names
Depending on how your ISP set up your Internet account, you could need to know one or
more of these settings for a manual setup:
• Virtual path identifier (VPI) and virtual channel identifier (VCI) parameters
• Multiplexing method
• Host and domain names
- N750 Wireless Dual Band 1
- Gigabit Router WNDR4000 1
- Technical Support 2
- Trademarks 2
- Statement of Conditions 2
- Contents 3
- Chapter 6 USB Storage 4
- Chapter 7 Advanced Settings 5
- Chapter 8 Troubleshooting 5
- 6 6
- Hardware Setup 7
- Unpack Your Wireless Router 8
- Hardware Features 8
- Back Panel 10
- Position Your Router 11
- Cable Your Router 12
- Verify the Cabling 13
- Replace an Existing Router 16
- Gather ISP Information 16
- Log In to the Router 17
- Upgrade Firmware 18
- Router Interface 18
- Setup Wizard 19
- Manual Setup (Basic Settings) 20
- No ISP Login 21
- ISP Login 21
- Change Password 23
- Log Out Manually 24
- Types of Logins 24
- Wireless Settings 25
- Security Basics 26
- Disable SSID Broadcast 27
- Manual Method 27
- WPS Button Method 28
- Router Interface Method 28
- Wireless Settings Screen 29
- Security Options Settings 31
- Wireless Guest Networks 32
- Content Filtering Settings 34
- Examples of Log Messages 36
- Delete Keyword or Domain 37
- Block Services 38
- Set the Time Zone 40
- Schedule Services 41
- Port Forwarding 43
- Add a Custom Service 44
- Port Triggering 46
- Ending Port fields 48
- Network Maintenance 49
- Upgrade the Firmware 50
- Manage the Configuration File 52
- View Router Status 53
- LAN Port (Local Ports) 54
- Wireless Port 54
- Show Statistics 54
- Connection Status 55
- View Attached Devices 56
- USB Storage 57
- USB Drive Requirements 58
- File-Sharing Scenarios 58
- USB Storage Basic Settings 59
- Edit a Network Folder 60
- USB Storage Advanced Settings 61
- Access Method 62
- Available Network Folders 62
- Unmount a USB Drive 63
- Approved USB Devices 64
- Advanced Settings 67
- WAN Setup 68
- Default DMZ Server 69
- Dynamic DNS 70
- LAN Setup 71
- LAN Setup Screen Settings 72
- IP Address Reservation 72
- Quality of Service (QoS) 73
- Advanced Wireless Settings 74
- WPS Settings 75
- Wireless Card Access List 75
- Remote Management Access 76
- Static Routes 78
- Add a Static Route 79
- Universal Plug and Play 80
- Traffic Meter 81
- Advanced USB Settings 83
- Figure 2. Repeater example 85
- Troubleshooting 87
- Quick Tips 88
- Troubleshooting with the LEDs 89
- Wireless LED Is Off 90
- Cannot Access the Internet 91
- Changes Not Saved 92
- Incorrect Date or Time 92
- Wireless Connectivity 93
- Supplemental Information 94
- Feature Default Behavior 95
- Technical Specifications 96
- Notification of Compliance 97
- FCC Information to User 99
- FCC Declaration of Conformity 99
- Index 101
- 102 102
- Index 103
- 104 104
Related products and manuals for Routers Netgear N750 Wireless Dual Band Gigabit Router WNDR4000
(30 pages)© 2020, manymanuals.com. All rights reserved. | 0.939 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals