Netgear N300 ROUTER WNR2000 User Manual Page 88

  • Download
  • Add to my manuals
  • Print
  • Page
    / 146
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 87
NETGEAR Wireless-N 300 Router WNR2000 User Manual
5-8 Fine-Tuning Your Network
v1.3, July 2009
2. Click Add Service (see Figure 5-1 on page 5-7).The Ports–Custom Services screen displays.
3. In the Service Name field, enter a descriptive name.
4. In the Service Type field, select the protocol. If you are unsure, select TCP/UDP.
5. In the Starting Port field, enter the beginning port number.
If the application uses only a single port, enter the same port number in the Ending Port
field.
If the application uses a range of ports, enter the ending port number of the range in the
Ending Port field.
6. In the Server IP Address field, enter the IP address of your local computer that will provide
this service.
7. Click Apply. The service appears in the list in the Port Forwarding/Port Triggering screen.
Figure 5-2
Page view 87
1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 145 146

Comments to this Manuals

No comments