Netgear N150 Wireless Router WNR1000 User Manual download pdf (Page 21)

Manually Installing Your Router 17

3. Turn on your computer. It will take several minutes for your router to establish a connection

with your computer and your Internet provider.

Verifying Your Connection

Verify that your router is connected correctly by checking the wireless router status lights (as

illustrated in Figure 11).

For DSL customers, if software logs you in to the Internet, do not run that

software. You might need to go to the Internet Explorer Tools menu, Internet

Options, Connections tab and select “Never dial a connection.”

Figure 11

Table 2. Status Lights After Installation

Label Description

1. Power

The power light should turn solid green. If it does not, see “Checking Basic Router

Functions” on page 30.

2. Push 'N' Connect

The WPS button/light will not be lit unless you push it to enable Push ‘N’ Connect

(WPS) security. See “Using Push 'N' Connect (WPS) to Configure Your Wireless

Network” on page 23.

3. Wireless

The wireless light should be lit after turning on the wireless router.

4. Internet

The Internet port light should be lit. If it is not, make sure the Ethernet cable is

securely attached to the wireless router Internet port and the modem, and that the

modem is powered on.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 47 48

No comments

Netgear N150 Wireless Router WNR1000 User Manual Page 21