Netgear GA511 User's Guide download pdf (Page 17)

NETGEAR 10/100/1000 Mbps CardBus Adapter GA511 User Manual

2-3

v2.0, March 2007

2. When the Windows system boots up after installing the GA511 Gigabit CardBus Adapter, the

system automatically detects the new hardware and prompts you to install the driver software

for the device. Follow the prompts of the Found New Hardware Wizard to automatically use

the driver installed in step 1.

If you are installing more than one GA511 Gigabit CardBus Adapter, you must perform these steps

for each card.

Basic Installation Instructions

Use the procedure below for installation on a Windows Vista, XP, 2000, 98SE 2nd edition, or Me

system.

FIRST, INSTALL THE GA511 SOFTWARE.

a. Power on your notebook, let the

operating system boot up completely,

and log in as needed.

b. Insert the NETGEAR Adapter Resource

CD into your CD-ROM drive. The

Adapter Resource CD main page will

load.

c. From the Windows Start menu, select

Run. The Run dialog box opens.

d. Enter the path to the GA511 setup.exe

file on the CD. For example, if your CD-

ROM is drive D, enter

D:\GA511\setup as the path.

Then, click OK.

e. Follow the InstallShield Wizard steps,

click Finish when done, and if prompted,

restart your computer.

Now, the GA511 driver and utility software

are installed.

Adapters Resource CD

Windows Start > Run

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 43 44

No comments

Netgear GA511 User's Guide Page 17