Netgear HDX101 User Manual download pdf (Page 38)

HDX101 Powerline HD Ethernet Adapter User Guide

2-24 Installing the Powerline HD Ethernet Adapter

v1.2, February 2007

To set the priority of data transfers by the type of protocol:

1. Start the HDX101 Configuration Utility from the PC and wait for the utility to detect the

Powerline HD Ethernet adapters connected to the computer.

2. Select the QoS (Quality of Service) tab.

3. In the “Configure Advanced QoS Settings” section, give priority to multimedia transfers by

selecting UDP priority and UDP high priority in the Rule list boxes.

Otherwise, to give priority to database or document transfers, select TCP priority and TCP

high priority in the Rule list boxes.

4. Click the Apply button to set the traffic prioritization rule into all Powerline HD Ethernet

adapter devices.

Note: Changes to QoS settings will be applied to every detected device shown on the

Main tab, independent of the settings of the checkboxes in the Device Name

column.

Figure 2-28

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 44 45 46

No comments

Netgear HDX101 User Manual Page 38