Netgear 778S User's Guide download pdf (Page 18)

1. Insert the larger (Type A) end of the micro-USB cable into the AC charger.

2. Insert the other end of the cable into the micro-USB port on the side of your device.

3. Insert the AC charger into an electrical outlet. (If the battery is already partially changed

when the charger is plugged into the outlet, your device will power on automatically.)

While your device is charging, the LCD (and the Mingle Manager home page, if your device is

on) shows:

● If your device is on – and the percentage charged (for example, “92%”).

● If your device is off – , the percentage charged (for example, “92%”), and the

message “Charging…”

When your device is fully charged, the LCD (and the Mingle Manager home page, if your device

is on) shows:

● If your device is on – and the message “Battery is Fully charged. Please remove

power.” Click the power button to close the message.

● If your device is off – and the message “Battery is Fully charged. Please remove

power.” Click the power button to close the message.

Charging Through Your Computer

Note: If you will be using the USB connection to connect to the Internet (and not just for

charging your device), you must install the device driver. (See TRU-Install.)

Note: If you are using Mac OS X 10.4.x, after you connect your device you may see a warning

message that your computer is running on UPS backup battery and that you should prevent a

computer shutdown. You can continue with your work. To prevent this message from being

displayed, install the device driver.

Device Basics 17

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 168 169

No comments

Netgear 778S User's Guide Page 18