Netgear WPNT121 User's Guide download pdf (Page 35)

NETGEAR RangeMax™ 240 Wireless USB 2.0 Adapter WPNT121 User Manual

3-13

v1.0, February 2006

Setting up WPA-PSK Security

Follow the steps below to configure WPA-PSK Security.

1. Run the Wireless USB 2.0 Adapter Smart Wizard.

a. Make sure the software is installed and the Wireless USB 2.0 Adapter is fully inserted in a

USB port in your computer.

b. Use the icon to open the Smart Wizard. The Settings tab page opens.

2. Configure the Security settings.

a. In the Profile box, select the profile or type in a profile name.

b. In the Network Name (SSID) field select the network, or enter the SSID.

c. In the Security section, select WPA-PSK [TKIP].

For more information on WPA security, see the Web link to “Wireless Communications:”

in Appendix B.

Figure 3-9

Note: You will not get a wireless network connection unless the network SSID

matches exactly what is configured in the access point.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 47 48

No comments

Netgear WPNT121 User's Guide Page 35