Netgear WNA3100-100ENS User Manual download pdf (Page 24)

Wireless-N 300 USB Adapter WNA3100 User Manual

2-4

v1.0, December 2009

Using Push 'N' Connect to Join a Network

If there is a WPS network in your area, you can use Push 'N' Connect to join it and automatically

configure the wireless security settings for your adapter.

To join a network:

1. On the Networks tab, select the network and click Connect.

If the router supports Push 'N' Connect (also called WPS), the following screen displays:

2. Press and hold the push button on the side of the wireless-N USB adapter for 2 seconds. The

LED flashes.

3. Follow the wizard steps to push the router’s WPS button within 2 minutes, and connect to the

wireless network.

Creating a Profile to Connect to a Wireless Network

You can create and save a profile from the Settings tab.

To set up a profile:

1. Click the icon to open the Smart Wizard. The Settings tab displays:

Note: To use Push 'N' Connect you need to know the location of the wireless router, and

you must have access to the router so that you can push its WPS button.

Figure 2-3

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 47 48

No comments

Netgear WNA3100-100ENS User Manual Page 24