Netgear WG111T User Manual download pdf (Page 38)

NETGEAR 108 Mpbs Wireless USB 2.0 Adapter WG111T User Manual

2-14

v2.0, February 2007

2. Configure the Security settings.

a. In the Profile box, select the profile or type in a profile name.

b. In the Network Name (SSID) field select the network, or enter the SSID.

c. In the Security section, select WPA2-PSK [AES].

For more information about WPA2-PSK security, see the Web link to “Wireless

Communications” in Appendix B.

3. Save your settings in a Profile.

a. Click the Save Profile button. All the configuration settings are saved in this profile.

b. Click Apply and then click Close to exit the Smart Wizard.

Setting up WPA-PSK Security

Follow the steps below to configure WPA-PSK Security.

1. Run the WG111T Smart Wizard.

Figure 2-10

Note: You will not get a wireless network connection unless the network SSID

matches exactly what is configured in the access point.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 48 49

No comments

Netgear WG111T User Manual Page 38