Netgear GA311 User Manual download pdf (Page 36)

NETGEAR 10/100/1000 Mbps Gigabit Ethernet Adapter GA311 User Manual

3-6

v1.0, February 2007

• Try inserting the network adapter in another slot. If the new position works, the original slot in

your system may be defective.

• Replace the failed network adapter with one that is known to work properly. If the second

adapter works in the slot where the first one failed, the original adapter is probably defective.

• Install the network adapter in another functioning system and run the tests again. If the adapter

passed the tests in the new system, the original system may be defective.

• Remove all other network adapters from the system and run the tests again. If the adapter

passes the tests, the other adapters might be causing the conflict.

Table 3-3. PCI BIOS Parameters

Parameter Setting

Bus-Master Enabled

Interrupt

number

Set to any IRQ that does not conflict with another device

Latency timer Recommended range is between 20 and 255. This parameter is typically

set to 64

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 51 52

No comments

Netgear GA311 User Manual Page 36