Netgear DG834G User Manual Page 150

  • Download
  • Add to my manuals
  • Print
  • Page
    / 190
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 149
Reference Manual for the ADSL Modem Wireless Router DG834G
8-6 Troubleshooting
v1.0, October 2006
If you have selected a login program, you may have incorrectly set the Service Name, User
Name and Password. See “Troubleshooting PPPoE or PPPoA”, below.
Your ISP may check for your computer's host name.
Assign the computer Host Name of your ISP account to the modem router in the browser-
based Setup Wizard.
Your ISP only allows one Ethernet MAC address to connect to Internet, and may check for
your computers MAC address. In this case:
Inform your ISP that you have bought a new network device, and ask them to use the router’s
MAC address.
OR
Configure your router to spoof your computers MAC address. This can be done in the Basic
Settings menu. Refer to the ADSL Modem Wirelesss Router Setup Manual (see Table 2-2 on
page 2-10).
Troubleshooting PPPoE or PPPoA
The PPPoA or PPPoA connection can be debugged as follows:
1. Access the Main Menu of the router at http://192.168.0.1.
2. Under the Maintenance heading, select the Router Status link.
3. Click the Connection Status button.
4. If all of the steps indicate “OK” then your PPPoE or PPPoA connection is up and working.
5. If any of the steps indicates “Failed”, you can attempt to reconnect by clicking Connect. The
modem router will continue to attempt to connect indefinitely.
If you cannot connect after several minutes, you may be using an incorrect Service Name, User
Name or Password. There also may be a provisioning problem with your ISP.
Note: Unless you connect manually, the modem router will not authenticate using
PPPoE or PPPoA until data is transmitted to the network.
Page view 149
1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 189 190

Comments to this Manuals

No comments