Netgear XSM7224-100NES Datasheet download pdf (Page 4)

ProSafe

10 Gigabit Managed Switches M7100 series

- 4 -

Modern Access Layer Features Highlights

Layer 3 hardware with L2+ software affordability

M7100 series models are built upon L3 hardware

platform while Layer 2+ software package allows for

better budget optimization

• M7100seriesuseslatestgenerationsiliconlow-power65-nanometertechnology

• M7100seriesL2andL3switchingfeatures(accesscontrollist,classification,filtering,IPv4routing)are

performed in hardware at interface line rate for voice, video, and data convergence

M7100 series Layer 2+ software package provides

straight forward IP static routing capabilities for physi-

cal interfaces, VLANs and subnets

• M7100-24X

• Attheedgeofcampusnetworksorintheserverroom,staticroutesareoftenpreferredforsimplicity(L3fixed

routes to the next hop towards the destination network are manually added to the routing table), without any

impact on performance because L3 routing is wire-speed in M7100 series hardware

Top-of-the-line switching performance

32K MAC address table, 1K concurrent VLANs and 128 static routes for demanding enterprise and campus network access/distribution layers

80 PLUS certified power supplies for energy high efficiency

Green Ethernet with Energy Efficient Ethernet (EEE)

defined by IEEE 802.3az Energy Efficient Ethernet

Task Force

• SupportsAuto-EEEmode

• Additionally,PowerBackOfffeaturedropspowerconsumptionby15%to20%whenshortcoppercables

are detected

Increased packet buffering with up to 16 Mb dynamically shared accross all interfaces for most intensive virtualization applications

Low latency at all network speeds, including 10 Gigabit Copper links

Jumbo frames support of up to 12Kb accelerating storage performance for backup and cloud applications

iSCSI Flow Acceleration and Automatic Protection/QoS

for virtualization and server room networks containing

iSCSI initiators and iSCSI targets by:

• DetectingtheestablishmentandterminationofiSCSIsessionsandconnectionsbysnoopingpacketsusedinthe

iSCSI protocol

• MaintainingadatabaseofcurrentlyactiveiSCSIsessionsandconnectionstostoredataabouttheparticipants;

this allows the formulation of classifier rules giving the data packets for the session the desired QoS treatment

• InstallingandremovingclassifierrulesetsasneededfortheiSCSIsessiontraffic

• MonitoringactivityintheiSCSIsessionstoallowforagingoutsessionentriesifthesessionterminationpackets

are not received

• AvoidingsessioninterruptionsduringtimesofcongestionthatwouldotherwisecauseiSCSIpacketstobedropped

Ease of deployment

Automatic configuration with DHCP and BootP Auto Install eases large deployments with a scalable configuration files management capability, mapping IP addresses and

host names and providing individual configuration files to multiple switches as soon as they are initialized on the network

Both the Switch Serial Number and Switch primary MAC address are reported by a simple “show” command in the CLI - facilitating discovery and remote configuration

operations

Automatic Voice over IP prioritization with Auto-VoIP simplifies most complex multi-vendor IP telephones deployments either based on protocols (SIP, H323 and SCCP) or

on OUI bytes (default database and user-based OUIs) in the phone source MAC address; providing the best class of service to VoIP streams (both data and signaling) over

other ordinary traffic by classifying traffic, and enabling correct egress queue configuration

An associated Voice VLAN can be easily configured with Auto-VoIP for further traffic isolation

When deployed IP phones are LLDP-MED compliant, the Voice VLAN will use LLDP-MED to pass on the VLAN ID, 802.1P priority and DSCP values to the IP phones,

accelerating convergent deployments

Versatile connectivity

Large 10 Gigabit choice for access with 10GBase-T ports for legacy Cat6 RJ45 short connections (up to 300m) and Cat6A/Cat 7 connections up to 100m; and SFP+ ports

for fiber optic uplinks or short, low-latency copper DAC cables

Automatic MDIX and Auto-negotiation on all ports select the right transmission modes (half or full duplex) as well as data transmission for crossover or straight-through

cables dynamically

100Mbps and 1000Mbps backward compatiblity on all 10GBase-T RJ45 ports

1000Mbps backward compatibility on all SFP+ fiber ports

IPv6 support with multicasting (MLD for IPv6 filtering), ACLs and QoS

1 2 3 4 5 6 7 8 9 ... 22 23

Comments to this Manuals

No comments

Netgear XSM7224-100NES Datasheet Page 4

Comments to this Manuals

Related products and manuals for Network switches Netgear XSM7224-100NES