Netgear WN3500RP Installation Guide download pdf (Page 7)

Connect with WPS

Wi-Fi Protected Setup (WPS) lets you join a secure WiFi network without

typing the network name and password.

Note: WPS does not support WEP network security. If you are using WEP

security, follow the instructions in Connect with Web Browser Setup on

page 9

1. Press the WPS button on the extender.

The WPS LED blinks.

2. Within two minutes, press the WPS button on your router or access

point.

The WPS LED on the extender lights solid green, the 2.4 GHz Link

Rate LED lights, and the extender connects to your existing WiFi

network.

If the 2.4 GHz Link Rate LED does not light, try again. If it still does

not light, see Connect with Web Browser Setup on page 9.

3. If your WiFi router supports the 5 GHz band, repeat Steps 1 and 2 to

connect the extender to the 5 GHz band.

4. Find the new extended network name on your computer or WiFi

device.

1 2 3 4 5 6 7 8 ... 20

No comments

Netgear WN3500RP Installation Guide Page 7