Netgear EX2700-100PES User Manual Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 35
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
Install Your Extender
11
N300 WiFi Range Extender
9. Unplug the extender and move it to a new location closer to the area with a poor WiFi signal.
The location you choose must be within the range of your existing WiFi router network.
10. Plug the extender into an electrical outlet and wait one minute.
The Power LED
lights green. If the Power LED does not light, press the Power
button.
11. Use the Router Link LED
to help you choose a spot where the extender-to-router
connection is optimal.
Extender WiFi Performance
The extender LEDs indicate the strength of the extender’s WiFi connections. Use the
following table to understand the extender LEDs.
Table 2. WiFi performance LEDs
LED Description
Router Link LED indicates the strength of
the WiFi signal between the router and the
extender
.
The LEDs are color coded as follows:
Green indicates the best connection.
Amber indicates a good connection.
Red indicates a poor connection.
An LED that is off indicates no WiFi connection.
Device Link LED indicates the strength of
the WiFi signal between the extender and
the computer or mobile device.
Cable a Computer or Device to the Ethernet Port
You can use an Ethernet cable to connect a computer or device to the Ethernet port on the
extender. Here are some examples of when you might want to do this:
You want to use a computer to log in to the extender to view or change its settings, but
you are experiencing trouble connecting to the extender WiFi networks.
Y
ou already installed the extender and now you want to connect a device to the
extender’s Ethernet port.
To cable a computer to the extender Ethernet port:
1. Install the extender so that it is connected to your existing network with a WiFi link.
2. Connect an Ethernet cable to the Ethernet port on the extender and to an Ethernet port on
your computer
.
The computer connects to the extender. Your computer might display a message
notifying you of an Ethernet connection.
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 34 35

Comments to this Manuals

No comments