Netgear 7000 Series Managed Switch User Manual Page 196

  • Download
  • Add to my manuals
  • Print
  • Page
    / 220
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 195
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2
25-2 Protected Ports
v1.0, May 2008
.
The example is shown as CLI commands and as a Web interface procedure.
CLI Commands
To use the CLI to configure a protected port in order to isolate ports, enter the following CLI
commands:
Figure 25-1
Step 1: Create one VLAN 192 including PC1 and PC2.
(Netgear Switch) #vlan database
(Netgear Switch) #vlan 192
(Netgear Switch) #vlan routing 192
(Netgear Switch) #exit
(Netgear Switch) #configure
(Netgear Switch) (Config)#interface 1/0/23
(Netgear Switch) (Interface 1/0/23)#vlan pvid 192
(Netgear Switch) (Interface 1/0/23)#vlan participation include 192
(Netgear Switch) (Interface 1/0/23)#exit
(Netgear Switch) (Config)#interface 1/0/24
(Netgear Switch) (Interface 1/0/24)#vlan pvid 192
(Netgear Switch) (Interface 1/0/24)#vlan participation include 192
(Netgear Switch) (Interface 1/0/24)#exit
(Netgear Switch) (Interface-vlan 192)#interface vlan 192
(Netgear Switch) (Interface-vlan 192)#routing
(Netgear Switch) (Interface-vlan 192)#ip address 192.168.1.254 255.255.255.0
(Netgear Switch) (Interface-vlan 192)#exit
Page view 195
1 2 ... 191 192 193 194 195 196 197 198 199 200 201 ... 219 220

Comments to this Manuals

No comments