Netgear WNDAP330 User Manual download pdf (Page 4)

Version 1.0

LAYER2/LAYER3 SWITCH CONFIGURATION

Create a new VLAN

Access the VLAN configuration via

Switching, VLAN, Basic.

Input the VLANID, VLAN name and

select static as the VLAN type and click

on Add. Repeat the process for each

VLAN that needs to be created.

The picture shows the summary after

VLAN2 and VLAN3 have been created.

Assign Port’s membership (to a VLAN)

Access the VLAN Membership page via

Switching, VLAN.

Select the relevant VLAN ID and click

on the little arrow symbol beside Unit 1

(this will expand the menu showing the

list of available ports).

Click on the gray area below each port

until the relevant selection is set (U =

Untagged, T = Tagged, Gray = No

selection).

Click on Apply.

Note: The picture shows the membership

settings for VLAN2 as per our scenario.

Repeat the procedure for VLAN 3 and

VLAN1.

Change the port PVID

Access the Port PVID configuration page

via Switching, VLAN.

Set the PVID to the value for the

relevant VLAN (For example VLAN 3

PVID will be 3).

Select the ports that will be assigned

with the above PVID (in our scenario

ports 1/0/4 and 1/0/5 are in VLAN3).

Click on Apply.

1 2 3 4 5 6 7

Version 1.0 1

Comments to this Manuals

No comments