Netgear WGE101 User Manual download pdf (Page 15)

Making Advanced Settings Changes

You can use the bridge’s internal configuration software to make basic settings changes and any

advanced setting changes such as:

• Changing the password.

• Upgrading the bridge’s firmware.

• Restoring the factory default settings.

• Changing the IP address if the default address does work with your network.

You can access the bridge’s internal configuration software either through the Smart Navigator

or through an Internet browser.

To access the internal configuration software through the Smart Navigator:

1. Choose

Programs>NETGEAR WGE101 Bridge>Smart Navigator from the Start menu.

2. Select the bridge in the device list.

3. Click Advanced Settings.

4. Type admin as the User name and the current password. (password is the default.)

Note: If you get a warning that the IP address doesn’t match, see the Changing the Bridge’s

IP Address procedure on page 11.

5. Click OK.

For details on using the browser-based configuration software see the WGE101 Reference

Manual on the WGE101 54 Mbps Wireless Ethernet Bridge Resource CD.

1 2 ... 10 11 12 13 14 15 16 17

No comments

Netgear WGE101 User Manual Page 15