Netgear GA302T User Manual download pdf (Page 16)

Table 2-2. GA302T LEDs

Label Activity Description

DATA Blinking Brief bursts of data detected on the port

On Streams of data detected on the port

Off No data detected on the port

1000 On Good 1000 Mbps Gigabit Ethernet link

Off No 1000 Mbps link; possible link at different speed, possible bad cable,

bad connector, or configuration mismatch

100 On Good 100 Mbps Fast Ethernet link

Off No 100 Mbps link; possible link at different speed, possible bad cable,

bad connector, or configuration mismatch

10 On Good 10 Mbps Ethernet link

Off No 10 Mbps link; possible link at different speed, possible bad cable,

bad connector, or configuration mismatch

Preparing to Install Your GA302T Copper Gigabit Adapter

Follow the instructions provided in this section for installing the GA302T Copper

Gigabit Adapter in your server or workstation. For additional information about per-

forming these tasks on your particular system, refer to the manuals

included with your system hardware.

Before installing your Gigabit Adapter:

1. Make sure that your system meets the hardware and software requirements

provided in Table 2-1.

2. Make sure that your system uses the latest BIOS.

3. Turn off the power to your PC.

If you are running Windows, close all applications and click Start from the

desktop menu, select Shut Down, and then select Shut down the computer.

hardware installation 2-6

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 61 62

No comments

Netgear GA302T User Manual Page 16