Netgear GS108 User Manual Page 19
- Page / 140
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
GS108T Smart Switch Software Administration Manual
Getting Started with Switch Management 1-5
v1.0, December 2007
Manually Assigning Network Settings
If your network has no DHCP service, you must assign a static IP address to your switch. If you
choose, you can assign it a static IP address even if your network has DHCP service. Proceed as
follows:
1. Connect the GS108T Gigabit Smart Switch to your existing network.
2. Power on the switch by plugging in the AC-DC power adapter (the default IP is
192.168.0.239).
3. Install the Smart Wizard Discovery utility on your computer.
4. Start the Smart Wizard Discovery utility.
5. Click Discover for the Smart Wizard Discovery utility to find your GS108T Gigabit Smart
Switch. You should see a screen similar to that shown in
Figure 1-1 on page 1-3.
6. Click Configuration Setting. A screen similar to the following one displays.
.
7. Select the Disable radio button to disable DHCP.
8. Enter your chosen switch IP address, gateway IP address, and subnet mask, and then type your
password, and click Set. Ensure that your PC and the GS108T Gigabit Smart Switch are in the
same subnet. Make a note of these settings for later use.
NIC Setting on the Host That Accesses the GS108T Gigabit Smart
Switch
You enter the settings of your network interface card (NIC) under the MS Windows OS in
Windows screens similar to the following one. For comparison, the settings screens of the switch
are also shown, although they do not appear in the Windows view.
Figure 1-3
- GS108T Smart Switch 1
- Software Administration 1
- Contents 5
- About This Manual 10
- About This Manual xi 11
- How to Use This Manual 12
- How to Print This Manual 12
- Revision History 13
- Chapter 1 15
- Switch Management Interface 16
- Network with a DHCP Server 17
- Network without a DHCP Server 18
- Figure 1-3 19
- Web Access 20
- Additional Utilities 21
- Password Change 22
- Firmware Upgrade 22
- Chapter 2 25
- Navigation Tabs 26
- Chapter 3 29
- Managing System Settings 29
- System Information 30
- IP Configuration 31
- 3-4 Managing System Settings 32
- Managing System Settings 3-5 33
- Figure 3-3 33
- SNMP V1/V2 34
- Basic—LLDP Configuration 35
- 3-8 Managing System Settings 36
- Figure 3-5 36
- Advanced—LLDP Configuration 37
- Advanced—LLDP Port Settings 37
- 3-10 Managing System Settings 38
- Advanced—Local Information 39
- 3-12 Managing System Settings 40
- Item Description 41
- PVID The Port VLAN ID 41
- 3-14 Managing System Settings 42
- Table 3-5. MED Set Details 42
- Managing System Settings 3-15 43
- Figure 3-9 43
- 3-16 Managing System Settings 44
- Chapter 4 45
- Configuring Switching 45
- Port Configuration 46
- Configuring Switching 4-3 47
- Basic—LAG Configuration 48
- Basic—LAG Membership 49
- Advanced—LAG Configuration 50
- Advanced—LAG Membership 50
- Advanced—LACP Configuration 51
- 4-8 Configuring Switching 52
- Figure 4-6 52
- Basic—VLAN Configuration 53
- 4-10 Configuring Switching 54
- Figure 4-7 54
- Configuring Switching 4-11 55
- Figure 4-8 55
- Advanced—VLAN Configuration 56
- Advanced—VLAN Membership 56
- Configuring Switching 4-13 57
- Figure 4-9 57
- Figure 4-10 57
- 4-14 Configuring Switching 58
- Figure 4-11 58
- Configuring Switching 4-15 59
- Figure 4-12 59
- Figure 4-13 60
- 4-16 Configuring Switching 60
- Basic—RSTP Configuration 61
- Advanced—RSTP Configuration 61
- Advanced—Port Configuration 62
- Configuring Switching 4-19 63
- Figure 4-16 63
- Multicast 64
- Configuring Switching 4-21 65
- Figure 4-17 65
- Static Multicasting 66
- Multicast Group Membership 67
- Switch Configuration 68
- Address Table 69
- Dynamic Address 70
- Configuring Switching 4-27 71
- 4-28 Configuring Switching 72
- Chapter 5 73
- Configuring QoS and Security 73
- Basic—Rate Limit 74
- Figure 5-2 75
- Figure 5-3 76
- Figure 5-4 77
- Using the Security Tab 78
- Management Security 78
- Figure 5-5 79
- Figure 5-6 80
- Authentication Type 81
- Port Authentication 82
- Figure 5-8 83
- Advanced—802.1x Configuration 85
- Advanced—Port Authentication 85
- Figure 5-10 86
- Traffic Control 88
- Port Security 90
- IP Access List 91
- Figure 5-13 92
- Trusted MAC 93
- Chapter 6 95
- Port Statistics 96
- Figure 6-2 98
- EAP Statistics 99
- 802.1x Accounting Statistics 101
- Mirroring 102
- Configuration 103
- Memory Logs 105
- Flash Logs 106
- Server Logs 107
- Statistics 109
- Using the Maintenance Tab 110
- Device Reboot 111
- Factory Default 112
- File Upload 113
- Download 114
- Figure 6-15 115
- Using the Help Tab 116
- Online Help 117
- Appendix A 119
- Smart Wizard N/A Enabled 122
- Statistics 31 (per port) N/A 122
- Appendix B 123
- IEEE 802.1Q VLANs 124
- Port-Based VLANs 125
- Appendix C 129
- Network Cabling 129
- Twisted Pair Cables 130
- Patch Panels and Cables 131
- C-4 Network Cabling 132
- Figure C-3 132
- Near End Cross Talk 133
- Patch Cables 134
- Conclusion 135
- C-8 Network Cabling 136
Related products and manuals for Network switches Netgear GS108
Network switches Netgear GS110TP User Manual
(32 pages)
(32 pages)
Network switches Netgear FS726TP User Manual
(16 pages)
(16 pages)
Network switches Netgear FSM726 User Manual
(25 pages)
(25 pages)
Network switches Netgear EN104TP User Manual
(14 pages)
(14 pages)
Network switches Netgear GS728TPP User Manual
(277 pages)
(277 pages)
Network switches Netgear GS108E User Manual
(28 pages)
(28 pages)
© 2020, manymanuals.com. All rights reserved. | 1.487 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals