Netgear FS752TP-100EUS Datasheet Page 3

  • Download
  • Add to my manuals
  • Print
  • Page
    / 3
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 2
350 E. Plumeria Drive
San Jose, CA 95134-1911 USA
1-888-NETGEAR (638-4327)
www.NETGEAR.com
© 2011 NETGEAR, Inc. NETGEAR, the NETGEAR Logo, Connect with Innovation, PowerShift, and ProSafe are trademarks of NETGEAR,
Inc. in the United States and/or other countries. Other brand names mentioned herein are for identification purposes only and may be
trademarks of their respective holder(s). Information is subject to change without notice. All rights reserved.
*Basic technical support provided for 90 days from date of purchase.
D-FS752TP-00
ProSafe
®
52-port 10/100 Fast Ethernet PoE Smart Switch with 4 Gigabit Uplink Ports FS752TP
• Environmental Specifi cations
– Operating temperature: 32° to 122° F –
(0° to 50° C)
– Storage temperature: -4° to 158° F – (-20°
to 70° C)
– Operating humidity: 90% maximum –
relative humidity, non-condensing
– Storage humidity: 95% maximum –
relative humidity, non-condensing
– Operating altitude: 10,000 ft – (3,000 m)
maximum
– Storage altitude: 10,000 ft – (3,000 m)
maximum
• LEDs
– Per port (10/100 and Gigabit): – Link/
activity, speed
– Per device: Power, Fan, PoE Max, LED
Mode
– Per PoE port: PoE Power, PoE fault
• Safety
– UL/cUL 60950-1
– CE EN 60950-1
– CCC
–CB
• System Requirements
– Category 5 UTP Network cables or above
– Network card for each PC
– Network software (e.g., Windows
®
)
– Web browser (e.g., Internet Explorer – 6.0
or higher, Netscape 6.0 or higher)
Administrative Switch Management
– IEEE 802.1Q static VLAN – (128 groups,
static)
– IEEE 802.1p Class of Service (CoS)
– Port-based QoS
– DSCP-based QoS
– DiffServ
– IEEE802.3ad link aggregation – (manual
or LACP)
IEEE 802.1D Spanning Tree – Protocol (STP)
– IEEE 802.1w Rapid Spanning – Tree
Protocol (RSTP)
– IEEE 802.1s Multiple Spanning – Tree
Protocol (MSTP)
– IEEE 802.1ab Link Layer Discovery –
Protocol (LLDP)
– LLDP-MED
– SNMP v1, v2c, v3
– RFC 1213 MIB II
– RFC 1643 Ethernet interface MIB
– RFC 1493 bridge MIB
– RMON group 1, 2, 3, 9
– RFC 2131 DHCP client
– Voice VLAN
– Auto-VOIP
– DHCP Filtering
– Auto denial-of-service (DoS) protection
– HTTP and HTTPS
– Ping and traceroute
– Power saving when link down
– IEEE 802.1x
– Port-based security by locked – MAC
addresses
– IP and MAC ACL
– Storm control for broadcast, multicast and
unknown unicast packets
– IGMP snooping v1/v2/v3
– Protected Port
– PoE Timer
Port-based ingress and egress rate –
limiting
– SNTP
– Port mirroring support (many to one)
– Static Routing (support for up to 10 static
routes)
– Web-based confi guration
– Confi guration backup/restore
– Password access control
– RADIUS Support
– TACACS+ support
– Syslog
– Firmware upgradeable
– Cable test
• Performance Specifi cations
– Forwarding modes: Store-and-forward
– Bandwidth: 17.6 Gbps
– Network latency: <20µs for 64-byte –
frames in store-and-forward mode for
100 Mbps to 100 Mbps transmission
– Buffer memory: 1.5 MBytes per system
– Address database size: 4,000 media
access control (MAC) addresses per
system
– Addressing: 48-bit MAC address
– Mean time between failures (MTBF):
230,731 hours at 25C (~26.4 years)
– Acoustic noise: 34.5 dBA
Modules
– AGM731F 1000BASE-SX SFP Module
– AGM732F 1000BASE-LX SFP Module
– AGM733 1000BASE-ZX SFP Module
– AFM735 100BASE--FX SFP LC Module
Warranty
– NETGEAR Lifetime Warranty
OnCall 24x7, Category 1
– PMB0331-100 (US)
– PMB0331 (non-US)
Package Contents
– 52-port PoE Smart Switch with 4 Gigabit
Ports (FS752TP)
– Rubber footpads
– Power cord
– Rack-mount kit
– Resource CD
– Installation guide
Ordering Information
– North America: FS752TP-100NAS
– Europe: FS752TP-100EUS
– Asia & Japan: FS752TP-100AJS
Page view 2
1 2 3

Comments to this Manuals

No comments