Netgear 7200 Series User Manual download pdf (Page 41)

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software

Quick Startup 6-9

202-10010-01

Solution 1

All traffic entering the ports is tagged traffic. Since the traffic is tagged, the PVID configuration

for each port is not a concern. The network card configuration is as follows:

• Devices on Project A should tag all traffic with 'VLAN 2'

• Devices on Project B should tag all traffic with 'VLAN 3'

• Devices on Project C should tag all traffic with 'VLAN 4'

• Devices on Project P should tag all traffic with 'VLAN 9'

Solution 2

The network card configuration for devices on Project A, B and C should be set to NOT tag traffic.

To take care of these untagged frames configure the following:

• config vlan ports pvid 2 0.1

• config vlan ports pvid 2 0.2

• config vlan ports pvid 3 0.3

• config vlan ports pvid 3 0.4

• config vlan ports pvid 4 0.5

• config vlan ports pvid 4 0.6

create VLAN 4 config vlan create 4

config vlan participation include 4 0.5

config vlan participation include 4 0.6

create VLAN 9 config vlan create 9

config vlan participation include 9 0.1

config vlan participation include 9 0.2

config vlan participation include 9 0.3

config vlan participation include 9 0.4

config vlan participation include 9 0.5

config vlan participation include 9 0.6

config vlan participation include 9 0.7

Table 6-9. Creating the VLANs

VLAN Command

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 157 158

No comments

Netgear 7200 Series User Manual Page 41