Netgear RNDP6310 User Manual download pdf (Page 15)

ReadyNAS Desktop Storage Systems

 To access the boot menu:

1. Power off your unit.

2. Using a straightened paper clip, press and hold the Reset button.

3. Press the Power button to power on the unit.

4. Continue to press the Reset button until the Power button LED, USB and backup status

LED, disk 1 LED, and disk 2 LED illuminate.

5. Press the Backup button to scroll through boot mode options.

The unit shows the boot mode options using the LEDs, as described in the following

table:

Boot Mode Status Indicator

Description Power

LED

Disk 1

LED

Disk 2

LED

USB &

Backup

LED

Normal Power LED illuminates.

Factory default Disk 1 LED illuminates.

OS reinstall Disk 2 LED illuminates.

Tech support USB and backup status LED illuminates.

Skip volume check Power LED and disk 1 LED illuminate.

Memory test Power LED and disk 2 LED illuminate.

Disk test Power LED and USB and backup status

LED illuminate.

Legend:

• On: 

• Off:



6. Press and release the Reset button to confirm your boot menu selection.

The system boots in the selected boot mode.

 

  

 





   

 

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 47 48

No comments

Netgear RNDP6310 User Manual Page 15