Netgear ReadyNAS Pro Business Edition User Manual Page 38
- Page / 120
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
ReadyNAS Pro Business Edition User Guide
2-16 Setting Up and Managing Your ReadyNAS Pro
v1.3, November 2008
Adding a Volume
After deleting the volume, Add Volume tab displays listing the available configurable space on the
hard disks. All the disks are selected by default. You can elect to specify a hot spare disk if you
wish. A hot spare remains in standby mode and automatically regenerates the data from a failed
disk from the volume. A hot spare disk is available for RAID level 1 and RAID level 5 only if
there are enough disks to fulfill the required minimum plus one.
.
To add a volume:
1. Select the hard disks. In this example, we select the first three disks and elect not to specify
any of them as a hot spare.
2. Select the RAID level. RAID level determines how the redundancy, capacity utilization, and
performance are implemented for the volume. Typically in a configuration of three or more
disks, RAID level 5 is recommended.
In our example, we selected RAID level 5 for the three selected disks.
3. Specify the reserve space for a snapshot. Next, select the percentage of the volume you wish to
allocate for snapshots. You can specify 0 if you wish to disable snapshot capability, or you can
specify a percentage in 5 percent increments from 5 to 50 percent.
The percentage represents the amount of data you think changes while the snapshot is active.
This typically depends on how often you schedule your snapshot to occur (see “Snapshots” on
page 4-8), and the maximum amount of data (plus padding) you think changes during that
time. Make sure to allocate enough space for a worst case as the snapshot becomes unusable
when its reserved space runs out.
Figure 2-19
- ReadyNAS Pro 1
- Business Edition User 1
- Contents 5
- About This Manual 9
- How to Use This Manual 10
- How to Print This Manual 10
- Revision History 11
- Chapter 1 13
- Getting Acquainted 13
- X-RAID Is Expandable RAID 14
- X-RAID2 Is Even More Flexible 15
- Front and Side Panel 16
- Drive Bay 17
- Rear Panel 18
- Initial Setup 19
- The RAIDar Setup Utility 20
- Getting Acquainted 1-9 21
- Figure 1-5 21
- Figure 1-6 21
- NETGEAR ReadyNAS Community 22
- Chapter 2 23
- Ethernet Interfaces 24
- Figure 2-6 26
- Global Network Settings 27
- Figure 2-9 28
- Route: A Manual Routing Table 29
- Updating the Admin Password 30
- Standard File Protocols 31
- Streaming Services 33
- Discovery Services 34
- Figure 2-17 37
- Figure 2-18 37
- Figure 2-19 38
- Figure 2-20 39
- Volume Management for X-RAID2 40
- Volume Maintenance 41
- Working with USB Volumes 42
- Figure 2-24 43
- Setting Up Printers 44
- Managing Print Queues 45
- Adjusting System Settings 46
- Figure 2-29 47
- Figure 2-30 47
- Figure 2-31 48
- Language Settings 49
- Figure 2-34 50
- Figure 2-35 51
- Figure 2-36 51
- Figure 2-37 52
- Figure 2-38 52
- Configuration Backup 53
- Chapter 3 55
- Managing User Access 55
- 3-2 Managing User Access 56
- Figure 3-1 56
- User Security Mode 57
- Domain Security Mode 58
- Managing User Access 3-5 59
- Changing User Passwords 63
- Managing Your Shares 64
- Adding Shares 65
- Managing Shares 65
- 3-12 Managing User Access 66
- Figure 3-14 66
- Managing User Access 3-13 67
- Figure 3-15 67
- 3-14 Managing User Access 68
- Figure 3-16 68
- Managing User Access 3-15 69
- Figure 3-17 69
- Figure 3-18 69
- Web Browser 70
- Managing User Access 3-17 71
- Figure 3-21 71
- Figure 3-22 71
- FTP/FTPS 72
- Managing User Access 3-19 73
- Figure 3-25 73
- Remote Access 74
- Remote FTP Access 75
- Remote HTTP Access 76
- Managing User Access 3-23 77
- Figure 3-30 77
- 3-24 Managing User Access 78
- Securing Your Data 79
- Chapter 4 79
- 4-2 Securing Your Data 80
- Securing Your Data 4-3 81
- 4-4 Securing Your Data 82
- Figure 4-2 82
- Securing Your Data 4-5 83
- Figure 4-3 83
- Viewing the Backup Schedule 84
- Programming the Backup Button 85
- Snapshots 86
- Securing Your Data 4-9 87
- Figure 4-7 87
- 4-10 Securing Your Data 88
- Figure 4-8 88
- Figure 4-9 88
- Securing Your Data 4-11 89
- Figure 4-10 89
- Figure 4-11 89
- 4-12 Securing Your Data 90
- Chapter 5 91
- Optimizing Performance 91
- Adding a UPS for Performance 92
- Power Management 93
- Power Timer 94
- UPS Configuration 94
- Wake-On-LAN 94
- Chapter 6 95
- Managing Levels of Service 95
- Figure 6-2 96
- Figure 6-3 96
- Replacing a Failed Disk 97
- Figure 6-5 98
- Figure 6-6 98
- Resynchronizing the Volume 99
- Configuring RAID 101
- Shutdown 102
- Appendix A 103
- AFP over Bonjour 104
- AFP over AppleTalk 105
- Figure A-6 106
- Figure A-7 106
- MAC OS 9 107
- Figure A-10 108
- Figure A-11 108
- Figure A-12 109
- Appendix B 111
- Related Documents 111
- B-2 Related Documents 112
- Numerics 113
Related products and manuals for NAS & storage servers Netgear ReadyNAS Pro Business Edition
(100 pages)© 2020, manymanuals.com. All rights reserved. | 0.478 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals