Netgear CG814WG V3 User Manual download pdf (Page 27)

Wireless Cable Modem Gateway CG814WG v3 Reference Manual

Wireless Configuration 2-9

v1.0, June 2007

Settings for WEP encryption are shown on the screen:

4. Select the Authentication. Choose Open System, Shared Key, or Open System or Shared

Key. The default is Open System.

5. Enter the encryption settings:

• WEP PassPhrase: To use a passphrase to generate the keys, enter a passphrase and click

Generate. This automatically creates the keys. Wireless stations must use the passphrase or

keys to access the gateway.

• Key 1-Key4: You can manually enter the four data encryption keys. These values must be

identical on all computers and access points in your network. Enter ten hexadecimal digits

(any combination of 0-9, a-f, or A-F).

• Select which of the four keys will be the default. Data transmissions are always encrypted

using the default key. The other keys can only be used to decrypt received data. The four

entries are disabled if WPA-PSK or WPA authentication is selected.

6. Click Apply to save your settings.

Figure 2-3

Note: If you use a wireless computer to configure WEP settings, you will be

disconnected when you click Apply. Reconfigure your wireless adapter to match

the new settings or access the gateway from a wired computer to make any further

changes.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 63 64

No comments

Netgear CG814WG V3 User Manual Page 27