Netgear WMS105-10000S User Manual Page 31

  • Download
  • Add to my manuals
  • Print
  • Page
    / 40
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 30
Chapter 6: Maintenance | 31
ProSafe 5 AP Wireless Management Software WMS105
Reset
The Reset screen lets you reboot managed access points.
1. On the Maintenance tab select Reset > Access Points > Reboot:
2. Select the Yes radio button.
3. Click Apply to reboot the access points.
SNMP
You can use SNMP for the Wireless Management Software. Enable SNMP to allow the
SNMP network management software, such as HP OpenView, to monitor the Wireless
Management Software by using SNMPv1/v2 protocol.
On the Maintenance tab, select Remote Management > System > SNMP:
SNMP checkbox: Enable SNMP for the Wireless Management Software.
Read-Only Community Name: The community string to allow the SNMP manager to
read the WMS105 MIB objects.
Read-Write Community Name: The community string to allow the SNMP manager to
read and write the WMS105 MIB objects.
Trap Community Name: The community name which is associated with the IP address
to Receive Traps.
IP address to Receive Traps: The IP address of the SNMP manager to receive traps
sent from the Wireless Management Software.
Page view 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 39 40

Comments to this Manuals

No comments