Netgear WMS105-10000S User Manual download pdf (Page 27)

Chapter 5: Monitoring | 27

ProSafe 5 AP Wireless Management Software WMS105

Access Point Status Details

From the Access Point Status screen,

click the Details button to view this

page.

You can use the Refresh button to

update statistics and information.

The Access Point Status screen shows

configuration settings, current wireless

settings, current clients and current

traffic statistics.

• Access Point Name: The access

point’s NetBIOS name.

• Model: The managed access

point’s model.

• Group: The configured group of

managed access point.

• IP Address: The IP Address of

managed access point.

• Ethernet MAC Address: The Ethernet MAC address of managed access point.

• 2.4 GHz Channel: 2.4 GHz channel configured on access point; set to -NA- if not

available.

• 5 GHz Channel: 5 GHz channel configured on access point; set to -NA- if not available.

• Load Balancing: Load balancing enable/disable status for access point.

Profile Information

The section displays configured and enabled security profiles on the access point.

• Type: 802.11 b//jointfilesconvert/31947/bg/ng or 802.11 a/na mode for security profile.

• SSID: Wireless Network SSID.

• Security: The mode of security configured for the profile.

• VLAN: VLAN configured for the security profile.

Client Information

This section displays access point client station information.

• MAC: Wireless MAC of the access point client.

• SSID: Wireless SSID configured on the managed access point to which the client

connects.

• Channel: The channel which client is using to connect.

• Mode: The mode (802.11 b//jointfilesconvert/31947/bg/ng or 802.11 a/na) for the security profile.

• Auth: The authentication mode (open, WEP, WPA, or WPA2) of security.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 39 40

No comments

Netgear WMS105-10000S User Manual Page 27