Netgear WGR614 v4 User Manual Page 129

  • Download
  • Add to my manuals
  • Print
  • Page
    / 152
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 128
Wireless Networking Basics D-1
December 2003
Appendix D
Wireless Networking Basics
This chapter provides an overview of Wireless networking.
Wireless Networking Overview
The WGR614 v4 router conforms to the Institute of Electrical and Electronics Engineers (IEEE)
802.11g standard for wireless LANs (WLANs). The 802.11g standard is backwards compatible
with the 802.11b standard. 802.11g and 802.11b devices can operate on the same wireless network
but the 802.11b devices will operate at the slower speeds of the 802.11b standard. On an 802.11b
or g wireless link, data is encoded using direct-sequence spread-spectrum (DSSS) technology and
is transmitted in the unlicensed radio spectrum at 2.5GHz. The maximum data rate for a 802.11b
wireless link is 11 Mbps, but it will automatically back down from 11 Mbps to 5.5, 2, and 1 Mbps
when the radio signal is weak or when interference is detected. The 802.11g auto rate sensing rates
are 1, 2, 5.5, 6, 9, 12, 18, 24, 36, 48, and 54 Mbps.
The 802.11 standard is also called Wireless Ethernet or Wi-Fi by the Wireless Ethernet
Compatibility Alliance (WECA, see http://www.wi-fi.net), an industry standard group promoting
interoperability among 802.11 devices. The 802.11 standard offers two methods for configuring a
wireless network - ad hoc and infrastructure.
Infrastructure Mode
With a wireless Access Point, you can operate the wireless LAN in the infrastructure mode. This
mode provides wireless connectivity to multiple wireless network devices within a fixed range or
area of coverage, interacting with wireless nodes via an antenna.
In the infrastructure mode, the wireless access point converts airwave data into wired Ethernet
data, acting as a bridge between the wired LAN and wireless clients. Connecting multiple Access
Points via a wired Ethernet backbone can further extend the wireless network coverage. As a
mobile computing device moves out of the range of one access point, it moves into the range of
another. As a result, wireless clients can freely roam from one Access Point domain to another and
still maintain seamless network connection.
Page view 128
1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 151 152

Comments to this Manuals

No comments