Netgear WAG102 User Manual Page 78

  • Download
  • Add to my manuals
  • Print
  • Page
    / 102
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 77
ProSafe Dual Band Wireless Access Point WAG102 Reference Manual (802.11a/g)
4-2 Advanced Configuration
v2.0, September 2006
Configuring Advanced Wireless Settings
The Advanced Wireless Settings screen is used to enable the Wi-Fi Multimedia (WMM) support,
and to configure and enable various wireless LAN parameters for both the 11a and 11b/g modes.
The default wireless LAN parameters usually work well. However, you can use these settings to
fine tune the overall performance of your wireless access point for your environment.
The Advanced Wireless Settings menu is used to configure the following:
Wi-Fi Multimedia (WMM) Support. Wireless Multimedia (WMM) is a subset of the
802.11e standard. WMM allows wireless traffic to have a range of priorities, depending on the
type of data. Time-dependent information, such as video or audio, has a higher priority than
normal traffic. For WMM to function correctly, Wireless clients must also support WMM.
Other Wireless LAN Parameters. The default advanced wireless LAN parameter settings
usually work well. If you want the wireless access point to operate in SuperA mode (for 11a)
or SuperG mode (for 11b/g), use this feature.
To configure Advanced Wireless Settings:
1. From the main menu under Advanced, select Wireless Settings 11a or Wireless Settings 11b/g.
The Advanced Wireless Settings screen you selected will display,
2. Wi-FI Multimedia (WMM) is disabled (No) by default. Select the Yes radio button to enable
WMM support.
Figure 4-2
Page view 77
1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 101 102

Comments to this Manuals

No comments