Netgear WAG102 User Manual download pdf (Page 72)

ProSafe Dual Band Wireless Access Point WAG102 Reference Manual (802.11a/g)

3-8 Management

v2.0, September 2006

To view the Wireless Station List:

1. From the main menu of the browser interface, under the Information heading, select Available

Wireless Station List.

2. Click Refresh to update the list.

Upgrading the Wireless Access Point Software

The software of the WAG102 Wireless Access Point is stored in FLASH memory, and can be

upgraded as new software is released by NETGEAR. Upgrade files can be downloaded from

Netgear's Web site. If the upgrade file is compressed (.ZIP file), you must first extract the image

(.RMT) file before sending it to the wireless access point. The upgrade file can be sent using your

browser.

You cannot perform the software upgrade from a computer that is connected to the WAG102

Wireless Access Point with a wireless link. You must use a computer that is connected to the

WAG102 Wireless Access Point with an Ethernet cable.

Figure 3-5

Tip: If the wireless access point is rebooted, the table data is lost until the wireless

access point rediscovers the devices. To force the wireless access point to look

for associated devices, click the Refresh button.

Note: The Web browser used to upload new firmware into the WAG102 must support

HTTP uploads, such as Microsoft Internet Explorer 6.0 or above, or Netscape

Navigator 4.78 or above.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 101 102

No comments

Netgear WAG102 User Manual Page 72