Netgear WAG102 User Manual Page 37

  • Download
  • Add to my manuals
  • Print
  • Page
    / 102
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 36
ProSafe Dual Band Wireless Access Point WAG102 Reference Manual (802.11a/g)
Basic Installation and Configuration 2-11
v2.0, September 2006
Logging In Using the Default IP Address
After you install the WAG102, log in to the wireless access point to configure the basic settings
and the wireless settings. The WAG102 is set, by default, with the IP address of 192.168.0.232
with DHCP disabled.
To log in using the default IP Address:
1. Open a Web browser such as Mozilla Firefox, Internet Explorer or Netscape Navigator.
2. Connect to the WAG102 by entering its default address of http://192.168.0.232 into your
browser.
3. The login screen will display. Enter admin for the user name and password for the password,
both in lower case letters.
4. Click OK.
Your Web browser should automatically find the WAG102 Wireless Access Point and display
the home screen, as shown in Figure 2-3 on page 2-6.
Note: The computer you are using to connect to the WAG102 should be configured with
an IP address that starts with 192.168.0.x and a Subnet Mask of 255.255.255.0.
Figure 2-7
Page view 36
1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 101 102

Comments to this Manuals

No comments