Netgear WAG102 User Manual Page 34

  • Download
  • Add to my manuals
  • Print
  • Page
    / 102
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 33
ProSafe Dual Band Wireless Access Point WAG102 Reference Manual (802.11a/g)
2-8 Basic Installation and Configuration
v2.0, September 2006
6. Configure the IP Address settings appropriate for your network. The default values are
suitable for most users and situations. (See the online help or “Setting Basic IP Options” on
page 2-12 for more information about how to configure the settings on this screen.
7. Enable 802.1Q VLAN, if required. (This option is only useful if the hubs/switches on your
LAN support the VLAN 802.1Q standard. If so, you can enable this feature.
8. Click Apply.
To configure your wireless settings for 11a and 11b/g:
1. From the main menu under Setup, select Wireless Settings11a. The Wireless Settings 11a
screen will display.
2. Enter the wireless settings for your area. See the online help or “Configuring 802.11a Wireless
Settings” on page 2-14.
3. Click Apply.
Note: By default, the WAG102 is set with the DHCP client disabled. If your network
uses dynamic IP addresses, you must either set up the WAG102 as a DHCP
client, or reserve a fixed IP address for the WAG102 in the DHCP server.
If you choose to enable the DHCP client in the WAG102, then to connect to the
WAG102 after the DHCP server assigns it a new IP address, enter the wireless
access point name into your Web browser. The default name is netgearxxxxxx,
where xxxxxx represents the last 6 bytes of the MAC address. The default
name is printed on the bottom label of the WAG102.
If the LAN port of your WAG102 is connected to a router and your network is
using the DHCP server in that router, you will be unable to access the wireless
access point using its name. In this case, you should reserve the IP address
192.168.0.232 for the WAG102. Refer to the documentation that came with
your router for instructions on how to do this.
Page view 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 101 102

Comments to this Manuals

No comments