Netgear XSM7224S User Manual download pdf (Page 288)

100

101

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0

Quality of Service (QoS) Commands 5-14

v1.0, November 2010

match class-map

This command adds to the specified class definition the set of match conditions defined for another

class. The <refclassname> is the name of an existing DiffServ class whose match conditions

are being referenced by the specified class definition.

no match class-map

This command removes from the specified class definition the set of match conditions defined for

another class. The <refclassname> is the name of an existing DiffServ class whose match

conditions are being referenced by the specified class definition.

Default none

Format match class-map <refclassname>

Mode Class-Map Config

Ipv6-Class-Map Config

Note:

• The parameters <refclassname> and <class-map-name> can not be the same.

• Only one other class may be referenced by a class.

• Any attempts to delete the <refclassname> class while the class is still referenced by any <class-

map-name> fails.

• The combined match criteria of <class-map-name> and <refclassname> must be an allowed

combination based on the class type.

• Any subsequent changes to the <refclassname> class match criteria must maintain this validity, or

the change attempt fails.

• The total number of class rules formed by the complete reference class chain (including both

predecessor and successor classes) must not exceed a platform-specific maximum. In some

cases, each removal of a refclass rule reduces the maximum number of available rules in the

class definition by one.

Format no match class-map <refclassname>

Mode Class-Map Config

Ipv6-Class-Map Config

1 2 ... 283 284 285 286 287 288 289 290 291 292 293 ... 578 579

Comments to this Manuals

No comments

Netgear XSM7224S User Manual Page 288

Comments to this Manuals

Related products and manuals for Software Netgear XSM7224S